This commercial electric demolition hammer is a powerhouse for breaking concrete, tile, masonry, stucco, brick and more. Ideal for demolition, chipping, and trenching tasks. It features a 1-1/8” Hex chuck with flat and bull point chisels. The side handle can swivel 360° and lock for precise control. Its adjustable two-handle design helps you maintain a comfortable working position. With an industrial-strength breaking force of 50 Joules, it can handle tough demolition jobs. It also has a high impact rate of 1650 BMP. Specifications include a 1700W power, 120V / 60Hz power supply, 50 Joules / 37 foot-pounds of impact power, 30mm hexagon flat shank system with key chuck, and it weighs 39 lbs. (17.7 kg). Accessories include a protective case, a carbon brush set, a lubricant grease-tube, a lubricant cover wrench, an operator manual, a bull point chisel, a flat chisel, and two hex chuck keys. Chisel size is 1-1/8 x 16” (30 x 410 mm).
Using this demolition hammer is straightforward. First, make sure it's plugged into a 120V / 60Hz power source. Select the appropriate chisel (flat or bull point) according to your task and insert it into the 1-1/8” Hex chuck. You can adjust the side handle to your preferred position and lock it for better control. Hold the hammer with both hands using the adjustable two - handle design to maintain a comfortable posture. When using it, start with a light touch and gradually increase the force as needed. Remember, this hammer has a high impact rate, so be careful. For maintenance, regularly check the carbon brushes and replace them when they're worn out. Use the lubricant grease - tube to keep the moving parts lubricated. After each use, clean the hammer and store it in the protective case. Also, keep the operator manual handy for any detailed information.
