Economy Tuck Point Blade
This blade can be used dry or wet. It's perfect for working on mortar, masonry, and concrete. It fits an angle grinder. Here are the available models:
| Model | Description | Seg. Height |
| PMX30MT0425C | 4 X .250 X 7/8 - 5/8 | 10MM (.394') |
| PMX30MT4525C | 4.5 X .250 X 7/8 - 5/8 | 10MM (.394') |
| PMX30MT0525C | 5 X .250 X 7/8 - 5/8 | 10MM (.394') |
Using this economy tuck point blade is easy. First, make sure your angle grinder is turned off and unplugged. Then, securely attach the blade to the grinder according to the grinder's instructions. You can use it dry or wet, depending on your preference. When working on mortar, masonry, or concrete, start at a slow speed and gradually increase as needed. Remember to wear safety goggles and gloves to protect yourself. After use, clean the blade with water and a soft brush to remove any debris. Store it in a dry place to prevent rusting. If you notice any damage to the blade, replace it immediately to ensure safe and effective operation.
