These 3 camera mounting cups offer a reliable and temporary way to mount cameras. They won't mark or damage most surfaces. The 360° swivel ball joint with a 1/4 - 20 stud allows you to position the camera in any direction. Key features and benefits include a maximum load capacity of 15 lbs [7 kg] for the cup without the camera mount, no need for drilling holes, a red - line indicator for vacuum loss, and a supplied pad protector. Ideal for cameras and video cameras, it can be used on flat or curved surfaces. The material works well in temperatures from 0°F [-18°C] to 120°F [49°C]. The pad has a diameter of 3” [8 cm] and is model TL3, with UV - resistant rubber.
Using these camera mounting cups is easy. First, make sure the surface is clean and dry. Then, place the cup on the surface and press down to create a vacuum. Attach your camera to the 1/4 - 20 stud on the swivel ball joint. You can adjust the camera's position in any direction thanks to the 360° swivel. Remember, the maximum load capacity of the cup without the camera mount is 15 lbs [7 kg], so don't overload it. Keep an eye on the red - line indicator. If it shows a significant vacuum loss, press the cup down again to restore the vacuum. The pad protector is there to prevent damage to the surface, so always use it. When not in use, store the cups in a cool, dry place within the temperature range of 0°F [-18°C] to 120°F [49°C]. This will help maintain the UV - resistant rubber and keep the cups in good condition.
