Enhance the convenience, visibility, and efficiency of your racking system with our Crown Pallet Rack Decking. The sloped design makes it easier for users to perform their tasks. The 6 - gauge wire mesh can support 650 lbs. (uniformly distributed) and has a 4 - 1/2' slope in 21'. It's designed for our 42' deep x 1 - 1/2' step - type pallet rack beam and comes with a powder - coat finish. Here are the product models: SWMD - 4246 with 42' decking depth, 46' decking length, requiring 96' (2 pieces) for beam length and weighing 24 lbs; SWMD - 4252 with 42' decking depth, 52' decking length, requiring 108' (2 pieces) for beam length and weighing 25 lbs; SWMD - 4258 with 47 - 9/16' decking depth, 58' decking length, requiring 120' (2 pieces) for beam length and weighing 26 lbs. Note that all measurements are approximate, and slight variations may occur. The weights shown are approximate shipping weights.
Using the Crown Pallet Rack Decking is simple. First, make sure your 42' deep x 1 - 1/2' step - type pallet rack beam is properly installed. Then, place the decking on the beam. The sloped design helps you load and unload items easily. When using it, avoid overloading as the decking has a capacity of 650 lbs. (uniformly distributed). For maintenance, keep it clean and dry. If there are any signs of rust, you can use a mild cleaner to wipe it. Also, check the decking regularly for any damage, especially the wire mesh. If you notice any broken wires, replace the decking promptly to ensure safety.
