Dual Spindle Cutter – Pull Type – Heavy Duty

The Blue Diamond® Heavy Duty Dual Spindle Cutter is a top - notch tool for heavy - duty jobs. It can handle weeds, grass, and brush up to 3 inches in diameter. Ideal for tractors with a minimum of 42 hp or 52 hp, it comes in 8 - foot and 10 - foot widths. The dual - spindle design with two free - swinging blades each cuts down on impact shock when hitting stationary objects. A slip clutch and dual shock couplers safeguard the gearboxes and drivelines. Standard features include driveline shields, clutch shields, and front and rear chain discharge shields. There are two types available: lift type and pull type. Key features are a pull - type hitch with hydraulic rear wheels, 3 - inch cutting capacity, standard slip clutch protection, dual shock couplers, front/rear chain discharge shields, laminated flat - proof wheels, a 2 - year warranty, and a 5 - year limited gearbox warranty.

Using this cutter is easy. First, make sure your tractor meets the minimum horsepower requirements - 42 hp for the 8 - foot model and 52 hp for the 10 - foot one. Attach the cutter to your tractor using the pull - type hitch. When operating, drive at a reasonable speed, especially when cutting thicker brush. The cutter can handle objects up to 3 inches in diameter, but avoid hitting extremely large or hard objects. Regarding maintenance, regularly check the blades for wear and replace them if needed. Inspect the slip clutch and dual shock couplers to ensure they are in good working condition. Keep the chain guards and shields clean and intact. The gearboxes have a 5 - year limited warranty, but it's a good idea to check the oil levels and lubrication periodically. And don't forget to check the laminated wheels for any signs of damage. With proper use and maintenance, this cutter will serve you well for a long time.