These Magic Pads are ideal for polishing small areas like steps, bathroom countertops, kitchen bars, and walls. They can restore the initial brightness of marble and terrazzo surfaces in an eco-friendly way, using only water. With the Bonastre System, you can easily recover the natural shine of your surfaces with a drill. Available in different sizes - 13', 6', 5', 3' and a hand-held option. You can use them by hand, with a drill, radial - polisher - sander, or rotary. They can remove deep stains, etch marks, hard water deposits, and micro scratches without damaging the stone surface. The system includes different colored pads for various functions: Red Renova removes surface stains and scratches; Orange Renova refines for intense shine; Yellow Renova achieves a matte or satin gloss; Blue Renova intensifies brightness; and the Green Pad gives a super glossy finish. 3” Magic Renova covers 32 to 43 sq. ft. (3 to 4 m2), and 5” Magic Renova covers 35 to 45 sq. ft. (3.25 to 4.2 m2). Always use clean water and follow the step - by - step process for best results. Not suitable for granite surfaces, and there's a specific kit for silestone.
Using these Magic Pads is easy. First, make sure you're working on marble or terrazzo surfaces. For granite, don't use the drill kit. If you're not sure about the surface, send us a photo or video to the email. To use the pads, start with the Red Renova pad. Add clean water and make at least 20 clockwise circular passes on the area until it has a consistent matte finish. Rinse and dry the surface and check for uniformity. Next, use the Orange Renova pad. Again, use clean water and make 20 clockwise circular passes. Rinse, dry, and check for scratches from the previous step. Then, move on to the Yellow Renova pad. After 20 passes with clean water, you should see a nice gloss. Rinse, dry, and inspect. Finally, use the Blue Renova pad along with the Green Pad to get a mirror - like finish. Repeat the process one more time with fresh water. When using a drill, if it has variable speed, set it to medium. For non - variable speed drills, feather the trigger to keep the speed down. Always use clean water with each step and repeat the process in areas that need it. Keep the pads clean and dry when not in use. And remember, this product is eco - friendly, so no need for chemicals!
