This MB - 2 Alkaline HD cleaner is a game - changer! It can effortlessly get rid of stubborn dirt from stone, tile, grout, and other water - safe hard surfaces. It's a highly concentrated and biodegradable cleaner. With advanced technology, it can deeply penetrate grout and surfaces, making cleaning a breeze. For mixing, use hot water and adjust the ratio according to the soiling level: 3 oz. per gallon for light soiling, 6 oz. per gallon for medium soiling, and 8 oz. per gallon for heavy soiling. Stronger solutions can be used in extreme cases. For routine cleaning, try MB - 1 Floor Amore on floors and MB - 5 Stone & More on other surfaces. Before applying, test in an inconspicuous area, remove loose debris and wax or sealers. You can apply it with a mop, sprayer, cotton rag, or sponge. Let it sit for a while depending on the dirt level, but don't let it dry on the surface. Agitate with a brush or mop, then remove the solution and rinse thoroughly. Buff with a white nylon pad after it dries. To prevent future soiling, apply MB - 24 Barrier.
Using MB - 2 Alkaline HD is easy. First, mix it with hot water. The amount of cleaner per gallon of water depends on how dirty the surface is. For light dirt, use 3 oz. per gallon; for medium dirt, 6 oz. per gallon; and for heavy dirt, 8 oz. per gallon. If it's really bad, you can use a stronger solution. Before you start cleaning, test a small, hidden area to make sure it works well. Clear away any loose dirt and take off any wax or sealers on the surface. You can apply the cleaner with a mop, sprayer, cotton rag, or sponge. Let it stay on the surface for some time according to how dirty it is. The longer it stays, the better the result, but don't let it dry. Use a hand - brush or mop to scrub the surface. Then, remove the solution with a mop, wet/dry vacuum, or a dry cotton rag for small areas. Rinse the surface well with clean water. After it dries, use a white nylon pad to buff it for a nice, even clean. To keep the surface clean in the future, apply MB - 24 Barrier.
