This polypropylene carpet brush is a great tool for cleaning carpets with a floor machine. It comes with a 9200 Clutch Plate and Riser. It's a low - cost alternative to nylon, perfect for less frequent use and ideal for the rental trade. The bristles are slightly stiffer than nylon. It can be used for general scrubbing on marble and carpet floors. For brushes 14 inches in diameter and larger, the two outer rows of bristles are heavier to scrub the carpet and flex the pile, while the softer inner rows 'massage' the dirt out of the carpet for a deeper clean. Here are the details of different models: There are various sizes available from 10 inches to 20 inches in diameter. Most of the block types are plastic, except for the 10 - inch one which is wood. The filament color is white / black, and the filament diameter is 0.02 for smaller sizes and 0.02/0.25 for larger ones. Note that some models have black bristles only.
Using this carpet shampoo brush is easy. First, attach the brush to your floor machine with the included 9200 Clutch Plate and Riser. Then, add your carpet shampoo to the machine as you normally would. Start the machine and move it slowly over the carpet or marble floor you want to clean. For best results, go over the area a few times. When using, make sure the machine is in good working condition. Don't use the brush on extremely rough or damaged floors as it may damage the bristles. After each use, rinse the brush thoroughly with clean water to remove any dirt or shampoo residue. Let it dry completely before storing it in a dry place. If you notice any damaged bristles, it's time to replace the brush to ensure effective cleaning.
