CB733 Bore Mounted Motor

The Core Bore CB733 is a 3-speed electric drill motor designed for bore mounting. It offers a 16' bit capacity and comes with an amp warning light. This motor is very user - friendly as it includes an on/off switch, eliminating the need for a control panel. It operates at 20 amp, with 120V or 230V options. The built - in thermal overload protection ensures safety during operation. It also has a water connection for wet drilling. The motor features a 1.250'-7 threaded spindle and an on/off switch/amp meter. In comparison, the CB744 runs at 25 amp and 110 volt with different RPM values and part numbers.

Using the Core Bore CB733 motor is easy. First, connect it to the appropriate power source (either 120V or 230V). You can turn it on and off using the built - in switch. For wet drilling, connect a water source to the water connection. When using bits, make sure they fit within the 16' bit capacity. As for maintenance, keep the motor clean and free of debris. Check the amp warning light regularly. If it lights up, it may indicate an issue. Do not overload the motor. The built - in thermal overload protection will shut off the motor if it gets too hot, but try to avoid situations that could trigger this. Store the motor in a dry place when not in use.