Concrete and Asphalt Floor Saw

The SG10 is an outstanding floor saw, renowned as the fastest on the market. It's ideal for making clean cuts in newly poured 'green' concrete or general slab cutting. With a center - mounted blade and dual roller guides, it ensures straight cuts every time. The unique 6000rpm blade shaft speed enables the blade to smoothly'slice' through green concrete without disturbing the aggregate. This saw is high - speed and lightweight, perfect for relief joint sawing in new concrete. It's powered by a 7hp Subaru Robin EX21 engine with two - stage air filtration. The handle height is adjustable for operator comfort. It runs on gasoline/petrol, weighs 110lbs (50kg), has a cutting depth of 3.25' (82.6mm), a 10' (254mm) blade size, and a standard arbour size of 0.625' (15.88mm). Depth adjustment is via handle rotation.

Using the SG10 floor saw is quite straightforward. First, make sure the engine is filled with gasoline and the air filter is clean. Start the engine following the standard procedures for a 7hp Subaru Robin EX21 engine. When you're ready to cut, adjust the handle height to your comfort. The saw's center - mounted blade and dual roller guides will help you make straight cuts. For cutting newly poured 'green' concrete, the 6000rpm blade shaft speed will slice through it cleanly. When making relief joints in new concrete, this high - speed and lightweight saw is a great choice. Remember to wear appropriate safety gear, like goggles and ear protection. For maintenance, regularly check the air filter and clean or replace it as needed. Also, keep the blade sharp and check the depth adjustment mechanism for smooth operation. After each use, clean the saw to remove any concrete residue. If you notice any unusual noises or performance issues, stop using the saw and have it inspected by a professional.