Metabo GE 710 Compact Die Grinder

The Metabo GE 710 Compact Die Grinder (600615420) features a slim housing, making it perfect for handling in tight spots. Its compact design offers exceptional portability. With Vario - Constamatic (VC) full - wave electronics, you can work at customized speeds for different materials, and the speed stays almost constant under load. The thumbwheel allows for easy speed preselection. There's an electronic safety shutdown for unexpected stops and restart protection to prevent accidental start - up. Electronic overload protection ensures a long service life. It has a precise collar for stationary use, a precision collet for accurate concentricity, and a Metabo long - life motor with patented dust protection. No - load speed ranges from 13000 - 34000 RPM, it draws 6.4 AMPS, has a rated input power of 710 W and output power of 430 W. At rated load, it runs at 24000 RPM. The collar diameter is 1 11/16 ', collet chuck bore is 1/4 ', weighs 3.1 lbs without the power cable, and has a 9 - ft cable length. Vibration on the grind surface (up to Ø 25 mm) is 6.8 m/s² with a measurement uncertainty K of 1.5 m/s². Noise emission includes a sound pressure level of 82 dB(A), sound power level (LwA) of 93 dB(A), and a measurement uncertainty K of 3 dB(A).

Using the Metabo GE 710 Compact Die Grinder is easy. First, make sure you've selected the right speed using the thumbwheel according to the material you're working on. The Vario - Constamatic electronics will keep the speed steady even when there's load. When you start the grinder, it won't start up accidentally thanks to the restart protection. For stationary work, use the precise collar. When you're done, switch it off, and let it cool down. Keep in mind that the machine might differ in equipment and technical details depending on the configuration, so always check the delivery scope and product description. Only the accessories listed in the delivery scope are included. To maintain the grinder, regularly clean it to prevent dust build - up as the motor has dust protection but it's still good to keep it clean. Also, avoid overloading the machine as the electronic overload protection is there, but too much stress can still affect its lifespan. And don't forget to check the cable for any damages before each use.