The Metabo KFMPB 15 - 10 F (601755620) is a top - notch metal bevelling tool. It's designed for weld seam preparation with chamfer heights up to 10mm, ensuring maximum user safety through a deadman switch and braking system. Comes with a metal carry case for easy storage and transportation.
Key Features:
- One - touch controller: Patented, tool - free cutting depth setting in 0.1mm steps. It has stop points for quick setup and protects against accidental depth changes during work.
- Precise chamfer angle setting directly via the guide plate.
- Universal carbide burr with three carbide inserts, suitable for all chamfer angles from 0 - 90°.
- Large - surface guide plates for controlled work.
- Stop roller for easy pipe guiding during weld seam preparation.
- Tool - free adjustable bail handle for secure and even guiding.
- Metabo long - life motor with patented dust protection for a long service life.
- Tacho - Constamatic (TC) - Full Wave Electronics: Maintains constant speed under load for fast work progress.
- Patented mechanical braking system stops the carbide burr within 2 seconds after switching off.
- Electronic overload protection, soft start, and restart protection.
- Metal sheet sides protect users by deflecting chips.
Machine may vary in equipment and technical details based on configuration. Check delivery scope and product description. Accessories are included only if listed in the delivery scope.
Parameters:
- No - load speed: 12500 RPM
- Amps: 13 AMPS
- Rated input power: 1500 W
- Output power: 840 W
- Type of edges: Chamfer
- Max. chamfer width 45°: 9/16'
- Max. chamfer height at 45°: 3/8'
- Grade cutting depth setting: 0.1 mm
- Curvature smallest exterior Ø: 2 15/16'
- Weight (without power cable): 11.2 lbs
- Cable length: 157 1/2'
- Noise emission:
- Sound pressure level: 91 dB(A)
- Sound power level (LwA): 102 dB(A)
- Uncertainty of measurement K: 3 dB(A)
Using the Metabo KFMPB 15 - 10 F bevelling tool is quite straightforward. First, set the cutting depth using the one - touch controller. You can adjust it in 0.1mm steps easily without any tools. Then, use the guide plate to set the chamfer angle precisely. For working on pipes, use the stop roller to guide the tool along. When you're ready, hold the tool firmly with the adjustable bail handle and start the motor. The soft start feature will make the start smooth.
During use, always keep in mind the safety features. The deadman switch ensures the tool stops if you release it, and the braking system stops the carbide burr quickly. Also, be aware of the noise level and consider using ear protection.
For maintenance, make sure to keep the motor clean. Thanks to the patented dust protection, it can last a long time, but regular cleaning will still help. Check the carbide burr regularly for wear and replace it if needed. After each use, store the tool in the metal carry case to protect it from damage. And always check the delivery scope and product description to ensure you have all the accessories you need.
