Description
The Metabo WEV 1500 - 125 RT (601243420) angle grinder is a top - notch tool. It runs on 13.5 amps and has a 1500 - watt power. This grinder features speed regulation and an ergonomic soft handle, making it easy to use for long periods, even overhead. Its powerful motor has great overload capacity. The Vario - Tacho - Constamatic (VTC) full - wave electronics with a thumbwheel allows you to customize the speed according to the material, and the speed stays almost constant under load. The tool - free adjustable guard is twist - proof. It also has an electronic safety shutdown to reduce kickback if the disc stops suddenly, ensuring high user protection. There's an electronic soft start for a smooth startup, restart protection after a power failure, and auto - stop carbon brushes to safeguard the motor. Note that the machine shown may vary in equipment and technical details. Pay attention to the delivery scope and product description. Accessories are only included if listed in the delivery scope. The grinder has an amp rating of 13.2 AMPS, a 5 - inch grinding wheel, a rated input power of 1500 W, an output power of 900 W, a no - load speed of 3500 - 11000 RPM, 11000 RPM at rated load, a torque of 37.2 in - lbs, a 5/8' - 11 UNC spindle thread, weighs 5.3 lbs (without power cable), and has an 8 - ft cable length. The vibration levels are 9 m/s² for surface grinding and 5.3 m/s² for grinding with sandpaper, with an uncertainty of measurement K of 1.5 m/s². The noise emission includes a sound pressure level of 87 dB(A), a sound power level (LwA) of 98 dB(A), and an uncertainty of measurement K of 3 dB(A).
Using the Metabo WEV 1500 - 125 RT angle grinder is easy. First, make sure it's properly plugged in. You can adjust the speed using the thumbwheel according to the material you're working on. The ergonomic soft handle makes it comfortable to hold, even for long - term use. When starting the grinder, the electronic soft start will ensure a smooth startup. If there's a power failure, the restart protection will prevent it from accidentally starting up again. If the disc stops unexpectedly, the electronic safety shutdown will reduce kickback, protecting you. When using the grinder, always wear proper safety gear like goggles and gloves. Pay attention to the delivery scope and make sure you have all the necessary accessories. After use, clean the grinder regularly. Check the carbon brushes. They have an auto - stop feature to protect the motor, but it's still good to inspect them from time to time. Store the grinder in a dry and safe place. And remember, the machine might vary in equipment and technical details, so always refer to the product description.
