MS 20 Material Spreader

This manual pull - along dry shake material spreader, the MS 20, is an excellent tool for applying dry shake hardeners, reflective toppings, and coloring compounds. It's a must - have for construction projects. The hopper can hold 100 kg (220 lbs) of material. With a discharge range of 1 to 6 kg, it allows for precise application. The wheels drive the hopper blades, and each wheel is independent for easy turning. The foldable handle makes transportation and storage a breeze, while the folding stand simplifies material loading. The low dispensing height helps reduce dust. It also provides exact material measurement per square meter, saving on material costs and meeting job specifications. Technical specs: Length (Handle Up): 37.4' (950mm); Height (Handle up): 36.6' (930mm); Length (Handle down): 25.6' (650mm); Height (Handle down): 24.4' (620mm); Width: 5.1' (130mm); Discharge Width: 39' (990mm); Hopper Capacity: 220lbs (100kg); Weight: 132lbs (60kg).

Using the MS 20 Material Spreader is easy. First, open the folding stand and load your dry shake hardeners, reflective toppings, or coloring compounds into the hopper. Make sure not to exceed the 100 kg capacity. Then, fold down the stand and pull the spreader along the area you want to treat. You can adjust the discharge amount between 1 to 6 kg according to your needs. When turning, the independent wheels will make it smooth. After use, clean the hopper and blades to prevent material buildup. Store it with the handle folded for less space. Also, keep it in a dry place to avoid rust. And always follow the recommended material measurement per square meter for the best results and to save costs.