PL2150 Pipe Lift

The PL2150 Pipe Lift is a powerful tool with a 2,150 - pound lifting capacity. It's designed to fit pipes with an outside diameter ranging from 10.75 inches to 15.30 inches, including 10', 12', and 14' PVC, steel, ductile iron, or C900 PVC pipes. Using the power of gravity, this lift features a scissor - action design that securely clamps on the pipe. Unlike traditional methods like using straps or teacups, it significantly boosts productivity. One operator can easily grab, lift, and move pipes without assistance. Its unique wide scissor - grip design allows for a secure lift even when the pipe is off - center. Simply set the lift over the pipe, and the legs will automatically grab and hold tightly until the pipe is firmly set in place. The tongs are rubber - lined to ensure a secure grip on smooth surfaces. Note that for choosing the right lifter, pipe outside diameter and weight are the key factors. The PL2150 weighs 240 lbs and has dimensions of 42 × 42 × 24 inches.

Using the PL2150 Pipe Lift is easy. First, check the outside diameter and weight of the pipe to make sure it's within the lift's capacity. Then, position the lift over the pipe. The scissor - action legs will automatically grab and hold the pipe securely thanks to gravity. When you're ready to move the pipe, just lift it with your equipment. To set the pipe down, lower it gently until it's firmly on the ground. For safety, always check the rubber lining on the tongs before each use. If it's worn out, replace it immediately to ensure a good grip. Also, don't exceed the lift's 2,150 - pound capacity. To keep your lift in good condition, clean it regularly to remove dirt and debris. Check all the moving parts for any signs of wear or damage. Lubricate the joints as needed to keep the scissor action smooth.