The Titan 500 is a top - notch single - phase grinding and polishing machine. It's super compact yet highly performing, with a mono - directional fully geared planetary system and variable working speed. Ideal for large marble, terrazzo, granite, and concrete surfaces, it's great for industrial floor prep, bush - hammering, grinding, removing old glues and resins fast, and achieving mirror - polished concrete via the Hyper Concrete system. Key features include a single - shell, robust and space - saving framework. You can easily and quickly remove the planetary to use 20' discs, brushes, and tools. There's an optional 180° overturning system for extra weights to adjust grinding pressure or facilitate tool changes. It comes with a 46 - liter water tank and a total mechanical transmission with thermoset gears for maximum reliability and durability. It also has a 2 - year warranty (up to 2 years or 600 working hours for machines with an hour meter). The Titan 500 is also available as the Titan 530. Here are the specs for the Titan 500 and Titan 500 VS: different motor power (2900 - Watt max for Titan 500 and 3000 - Watt max for Titan 500 VS), same voltage (220), same hertz (50/60), different motor and tool speeds, and same work diameter, tool size, water tank capacity, size, and weight. Estimated production varies for different tasks like concrete polishing, grinding, terrazzo polishing, etc., and data may change based on surface conditions, tools, operator, and equipment.
Using the Titan 500 is quite straightforward. First, make sure the machine is on a flat surface. Connect it to a 220 - volt power source with the right hertz (50/60). If you need extra grinding pressure, use the 180° overturning system to move the weights to the front. When changing tools, move the weights to the back to make the operation easier. Fill the 46 - liter water tank before starting work to keep the surface cool and clean. As for the planetary part, you can easily remove it to use 20' discs, brushes, and other tools. Now, for the important stuff. Always wear proper safety gear like goggles and gloves. Check the surface for any hard objects or debris before you start. Don't overload the machine. If you're using it for a long time, take breaks to avoid overheating. When it comes to maintenance, after each use, clean the machine thoroughly, especially the water tank and the tools. Check the thermoset gears regularly for any signs of wear. If you notice any problems, refer to the warranty terms. For machines with an hour meter, remember the warranty is up to 2 years or 600 working hours.
