Mag 32 Magnetic Core Drill

The Mag 32 (600635620) Magnetic Core Drill is an outstanding tool ideal for using core drills, spiral drills, and countersinks. It features a large stroke, enabling a wide range of drilling tasks. Its magnetic base has high holding power, allowing you to work on vertical surfaces and overhead with ease. The Metabo long - life motor comes with patented dust protection, ensuring a long service life. There's an integrated coolant container for convenient internal cooling from the core drill. A bright LED light helps with easy alignment in low - light conditions. The chip protection guard can be fixed without tools, safeguarding you from metal shavings and tool contact. A protective circuit ensures the motor starts only when the magnet is activated, and restart protection prevents unintentional start - up after a power interruption. The lockable slide makes tool changes comfortable, and the handle facilitates easy carrying and lifting. It also has a sturdy 16 - foot electric cord with rubber sheathing. Note that the machine shown may vary in equipment and technical details based on the configuration. Pay attention to the delivery scope and product description, and accessories are included only if listed in the delivery scope. Here are the key parameters: Rated input power is 1000 W, Amps are 9 AMPS, Output power is 520 W, Max. drill - Ø with core drill is 1 1/4 ', Max. drill - Ø with spiral drill is 1/2 ', Maximum drilling depth is 2 ', No - load speed is 700 RPM, Revolutions at rated load are 450 RPM, Bit retainer is Weldon shaft 19 mm (3/4'), Weight is 26.2 lbs, Cable length is 16 ft, Torque is 443 in - lbs, Max. depth of feed is 6 5/16 ', Max. magnetic holding force is 12250 N, Dimensions of the magnet base are 3 9/16 x 7 1/2 ', Height of slide bottom setting is 13 1/2 ', Height of slide top setting is 19 9/32 '. Vibration for drilling in metal is 2.5 m/s² with an uncertainty of measurement K of 1.5 m/s². Noise emission: Sound pressure level is 85 dB(A), Sound power level (LwA) is 98 dB(A), and Uncertainty of measurement K is 3 dB(A).

Using the Mag 32 Magnetic Core Drill is straightforward. First, make sure the magnet is activated before starting the motor. This is an important safety measure as the protective circuit is designed to prevent the motor from starting without an active magnet. When drilling, choose the appropriate drill bit - core drills, spiral drills, or countersinks depending on your task. The large stroke of the drill allows you to handle different depths of drilling. For better visibility, especially in low - light areas, turn on the bright LED light. If you're using a core drill, the integrated coolant container can provide internal cooling. Just make sure to dose the coolant as needed. When changing tools, use the lockable slide for a comfortable and hassle - free experience. Carrying the drill is easy with the built - in handle. As for maintenance, keep the motor clean from dust thanks to its patented dust protection feature. Regularly check the magnetic base for any signs of wear or damage. Also, inspect the electric cord for cuts or frays. Remember, the accessories are only included if listed in the delivery scope, so check that carefully when you receive the product. And be aware that the machine's equipment and technical details may vary based on the configuration, so always refer to the product description for accurate information.