Bonastre Stone Soap

Bonastre Stone Soap is an excellent after - polishing rinse for various stone surfaces like Marble, Travertine, Limestone, Granite, Cement Terrazzo, and Concrete. It's a concentrated, non - acidic rinse. After the final stone polish, this soap effectively removes residues from polishing powders or mechanical polishing. It leaves the surface residue - free, haze - free, and waterproof. Dilute 2 oz per gallon of water. Use it at the last mechanical step or after powder polishing. When using after powder polishing, scrub the floor with a white pad for 3 minutes and then vacuum all the liquid with a wet/dry vacuum. It comes in a 5 - liter pail (1.32 gal).

Using Bonastre Stone Soap is easy. First, mix 2 ounces of the soap with one gallon of water. You can use this solution either at the last mechanical step of the stone - polishing process or after you've finished polishing with a powder. If you're using it after powder polishing, grab a white pad and scrub the floor surface for about 3 minutes. This helps to thoroughly remove the polishing residues. Once you're done scrubbing, use a wet/dry vacuum to suck up all the liquid from the surface. As for maintenance, keep the soap in a cool, dry place. And always follow the dilution ratio to ensure the best results. Also, make sure the floor is dry before walking on it after using the soap.