GP8H VELOCIMAX™ Non-Hazardous Location Air Ventilation Blower

This GP8H VELOCIMAX™ air ventilation blower is specially designed to meet most non-hazardous confined space ventilation needs. It's constructed with heavy-gauge aluminum and steel, ensuring durability. Applicable models are certified by the Canadian Standards Association (CSA), and all units come with independently laboratory-certified air flow rates. It usually requires less air duct unless it's included as a standard component. The power source is a 3.5 HP (2.6 Kw) Honda GX120 4-stroke gasoline engine with 3600 RPM. It has a governor with manual speed control to adjust the blower volume. The blower is of radial type, made of cast aluminum with a steel wheel, and has an 8.0-inch (203.2 mm) nominal diameter inlet/outlet. It features spring mounting and anti-vibration design, weighing 66.0 lbs (29.9 kg). The dimensions are 18.5 inches (470.0 mm) in height, 19.3 inches (490.2 mm) in length, and 15.6 inches (396.2 mm) in width. The free air flow rate is 1561.6 CFM (44.2 CMM), 1178.1 CFM (33.4 CMM) with one 90-degree bend, and 1066.2 CFM (30.2 CMM) with two 90-degree bends.

Using the GP8H VELOCIMAX™ air ventilation blower is easy. First, place it in a non-hazardous location where ventilation is needed. Connect the air duct if required. Start the 3.5 HP Honda engine following the normal engine starting procedure. You can adjust the blower volume using the manual speed control. When using, make sure the area is well-ventilated and free from flammable materials. Keep the blower away from water and high humidity environments. For maintenance, regularly check the engine oil level and change the oil as recommended by Honda. Inspect the blower and air duct for any signs of damage or blockage. Clean the blower and the air intake regularly to ensure optimal performance. If you encounter any problems, consult the user manual or contact the manufacturer.