1 qt. Tile & Grout Sealer: Seal after proper cleaning for best results.
This safe and easy-to-use cleaner is perfect for ceramic tile, tubs, fiberglass, and grout in your bath, shower, and kitchen. It effectively removes mineral stains and hard water deposits.
• Concentrated formula
• Biodegradable and eco-friendly
• Non-abrasive for gentle cleaning
• Cleans grout thoroughly
• Not suitable for polished surfaces
SDS Sheet
Fact Sheet
Glaze ’N Seal Tile & Grout Cleaner is a concentrated, non-abrasive formula. It's designed to clean and restore old, dirty tile and grout. It can remove soap scum, lime, hard water stains, scale, and light rust stains on contact without heavy scrubbing.
Use it on most ceramic tile, sealed clay tile, white grout, countertops, showers, tubs, chrome fixtures, stainless steel, fiberglass, and glass shower doors. It's great for any surface that needs a mild acidic cleaner, but avoid polished marble or limestone.
• Easy maintenance for kitchen and bathroom
• No heavy scrubbing needed
• Biodegradable
• Mild acid cleaners remove stains
• Slight, clean fragrance
APPLICATIONS
1. For light cleaning, mix one part cleaner with 10 parts water. Always add acid to water.
2. For heavy soil, use it full strength.
3. Apply with a clean sponge or mop. Let it sit for 1 - 2 minutes, then scrub with a stiff brush.
4. Rinse well and let dry. For dirty grout, wet first, apply cleaner, scrub, and rinse thoroughly.
NOTE: Seal grout joints with Glaze ’N Seal Acrylic Grout Sealer or Penetrating Sealer. LIMITATIONS: Don't use on metallic glazed tile, marble, terrazzo, or colored grout.
TEST A SMALL AREA FIRST. If etching occurs, wash immediately.
PRECAUTIONS: Contains phosphoric acid. Flush with cold water if in contact. Seek medical help if irritation persists. If swallowed, drink water and call a doctor. Handle with care.
KEEP AWAY FROM CHILDREN. Don't mix with other chemicals. Neutralize the surface before sealing with a product like Glaze ’N Seal Neutralizing Rinse.
This tile and grout cleaner is super easy to use. For light cleaning, just mix one part cleaner with 10 parts water, and always remember to add the acid to the water. If there's heavy soil buildup, use the cleaner full strength. Apply the solution to the surface with a clean sponge or mop, let it sit for one to two minutes, then scrub the area with a stiff - bristle brush, sponge, or pad. After that, rinse well and let it dry. For really dirty grout joints, wet them with clean water first, then apply the cleaner, let it sit, and scrub with a stiff brush before rinsing thoroughly. There are some things to watch out for. Don't use it on metallic glazed tile, marble, terrazzo, or colored grout. Always test a small area first because some tile and tubs are sensitive to the concentrated cleaner. If you notice any etching, wash the area right away. The cleaner contains phosphoric acid, so if it comes in contact with your skin, flush it with cold water. If irritation doesn't go away, get medical attention. If someone swallows it, give them 1 or 2 glasses of water and call a doctor. Keep it away from children and never mix it with other chemicals or detergents. Before applying any sealer to the cleaned tile or grout, use a product like Glaze ’N Seal Neutralizing Rinse to neutralize the surface. To preserve the grout's natural look, it's a good idea to seal the grout joints with Glaze ’N Seal Acrylic Grout Sealer or Penetrating Sealer.
