The Electric Wet Saw - Zapp Titan is an outstanding tool crafted to handle diverse cutting needs. It can cut ceramic tiles, porcelain tiles, marble, granite, and natural stones, regardless of whether they have smooth, rough, or relief surfaces. It's perfect for making pre - determined depth grooves, niches for electrical outlets, and bevel cuts from 45 to 90º. With a cutting capacity of up to 2 inches for straight and 45º cuts, it offers great versatility. Key features include an articulated system on the carriage, adjustable front protection for the cutting blade, a cooling system with a water reservoir and high - flow water pump, an adjustable backrest bar for precise 90º or 45º cuts, a side limiter with angle adjustment, and it comes with a 250mm diamond cutting blade. Note that the cut finish can vary based on the material. Model 1250 has a straight cut of 125 cm, diagonal cutting of 88 cm x 88 cm, a cutting thickness of 50 mm, operates at 110 V, has 2 HP power, a 250 mm bore with 15.88 mm inner bore, and comes as 1 unit per package.
Using the Zapp 1250 Titan Electric Wet Saw is easy. First, make sure the saw is plugged into a 110 - volt power source. Fill the water reservoir to keep the cutting disc cool. Place the material you want to cut on the saw's platform. Adjust the side limiter and backrest bar according to the type of cut you need, whether it's a straight cut, 45 - degree bevel, or a cut at a right angle. When you're ready, turn on the saw and gently guide the material through the blade. Remember, the cut finish can vary depending on the material, so be patient. As for maintenance, after each use, turn off the saw and unplug it. Empty the water reservoir to prevent rust. Clean the blade and the platform to keep them in good condition. Check the blade regularly for wear and tear, and replace it if it's too damaged. Also, make sure all the adjustable parts are in good working order. Always follow safety rules when using this saw, such as wearing safety glasses and gloves.
