Description
The CC1200XL Small Walk - Behind Saw is a great choice for general contractors. It features a heavy - duty design but is light enough for two people to lift and carry. It has a 14' - 18' blade capacity. Optional water tank is available for dust suppression, though the blade is not included. Key features are a cyclone air filter (Honda® models), an easy - to - read built - in depth indicator, a slip - on blade guard, heavy - duty non - rattling handles, left or right hand sawing, a single ribbed belt, and a water tank with a lifting bale. Specifications include a maximum cut depth of 4 - 5/8' with a 14' blade and 6 - 5/8' with an 18' blade, a blade shaft RPM of 2,600, a blade shaft diameter of 1 - 1/4', an arbor size of 1' with a single drive pin, right or left blade mounting, precision screw - feed blade raise/lower, adjustable handle bars, and a standard depth indicator. There are multiple engine options including Honda® and Briggs® models running on gas.
Using the CC1200XL Small Walk - Behind Saw is straightforward. First, choose the appropriate blade according to your project needs as it supports 14' and 18' blades. Make sure to check the engine oil and fuel level before starting, especially if it's a gas - powered engine. When starting the saw, follow the engine's starting instructions. Adjust the handle bars to a comfortable position for you. Use the built - in depth indicator to set the desired cutting depth precisely. When sawing, you can choose to operate it with your left or right hand as per your preference. For dust suppression, you can attach the optional water tank. Remember, the blade is not included, so you need to purchase it separately. As for maintenance, keep the air filter clean, especially if it's the cyclone air filter on Honda® models. Check the belt regularly for wear and tear. After each use, clean the saw to remove any debris. Also, follow the engine manufacturer's maintenance schedule for the best performance and longevity of your saw.
