The COMBI 250 - 1000VA table saw is a great choice for cutting tiles, stone, and more. It's a water - cooled saw with a 250 mm blade. It can make quality cuts on large tiles like 300x600 mm, 900x900 mm and larger, with a maximum cutting length of 1000 mm. Standard equipment includes a single - phase 230V/50Hz electric motor (1.5 kW) with thermal protection, an IP 55 switch, an IP 67 plug, a laser pointer, a cutting guide, a premium 250 mm diamond blade for hard porcelain, a protractor with a large support surface, an anodized extruded aluminum cutting surface, a shatter - resistant plastic water tray, a stand with two rubber wheels, and a side cutting surface (only for Combi 250 - 1500). Optional accessories and recommended blades are also available, such as a side cutting surface and different types of 250 mm diamond blades. It offers high cutting capacity for all types of materials, and can cut vertically or at a tilt between 90° and 45°. The machine can be shipped with a stand and can mount up to 2 side cutting surfaces.
Using the COMBI 250 Lite table saw is easy. First, make sure it's plugged in properly with the IP 67 plug and turn it on using the IP 55 switch. Place the tile or stone you want to cut on the anodized aluminum cutting surface. You can use the laser pointer to help guide your cut and the cutting guide for more precision. If you need to cut at an angle, use the protractor. The saw has a large cutting capacity, so it can handle big tiles. Remember to keep the water in the shatter - resistant plastic tray to cool the blade and prevent overheating. For maintenance, regularly check the electric motor for any signs of overheating. Clean the cutting surface and the blade after each use. You can replace the blade with the recommended diamond blades when it gets dull. Also, make sure the stand and the wheels are in good condition for easy movement and stability.
