Commercial Cold Water HD Cart Series Pressure Washer

The Kärcher HD Cart Series offers tough, gasoline - powered, direct - drive cold water pressure washers. These machines can reach up to 2,400 PSI of cleaning power. They are built on compact and sturdy steel frames. Each unit comes with a reliable industrial - grade Honda engine, a 7 - year Kärcher crankcase pump, a hose/gun rack, detergent injection, and tubed pneumatic tires. All models are ETL certified. There are two models available: the HD 2.3/24 P with a flow rate of 2.3 GPM and 2400 PSI, and the HD 2.5/27 P with 2.5 GPM and 2700 PSI. The maximum flow rate is 2.3 GPM, and the maximum operating pressure is 2400 PSI. It weighs 148 lbs with accessories and has dimensions of 35 x 21 x 24 inches.

Using your Kärcher HD Cart Series pressure washer is easy. First, make sure the machine is on a flat and stable surface. Connect the water supply to the inlet and the high - pressure hose to the pump and the gun. Fill the gasoline tank with the right type of fuel for the Honda engine. Start the engine following the engine's starting instructions. You can adjust the pressure as needed. For stubborn dirt, use the detergent injection feature. When using, always wear appropriate safety gear like goggles and gloves. Keep bystanders away from the spray area. After use, turn off the engine and release the pressure in the hose. Let the engine cool down before storing. Regularly check the oil level in the engine and the pump. Replace the oil as recommended by the manufacturer. Inspect the hoses and connections for any signs of wear or damage and replace them if necessary. Keep the machine clean and store it in a dry place.