This special jib is designed for workstations. You can place it over your workbench. The extra travel fixed-height I-beam extends beyond the workbench, allowing you to easily lift products from the cart to the bench. The I-beam flange is 2.66' and the height is 4.00'. The usable I-beam length is 79-3/4'. You can order the hoist and trolley separately. It's made of steel with a painted blue finish. All measurements are approximate, and slight variations may occur. The weights shown are approximate shipping weights. Here are the details of different models:
| Extra Travel Tri-Post Jibs |
| Model | PDF | Under I-Beam To Ground | Overall
Height | Overall Length | I-Beam Flange (WxL) | Straddle Width (ID) | Capacity (lbs) | Wt.
(lbs) |
| TJIB-3 | | 76-1/2' | 83' | 85-1/4' | 2.66'x4.00' | 41-1/2' | 300 | 238 |
| TJIB-6 | | 76-1/2' | 83' | 85-1/4' | 2.66'x4.00' | 41-1/2' | 600 | 248 |
| TJIB-10 | | 76' | 83' | 85-1/2' | 2.66'x4.00' | 41' | 1,000 | 285 |
| TJIB-20 | | 76' | 83-1/2' | 85-3/4' | 2.66'x4.00' | 40-1/4' | 2,000 | 321 |
KEY: = Approval Drawing -- = Warranty -- = Testing Certificate
Using the Extra Travel Tri - Post Jibs is quite easy. First, place the jib over your workbench. Make sure it's stable before you start using it. When you need to lift products from the cart to the bench, use the I - beam's overhang feature. You'll need to order the hoist and trolley separately and install them according to the instructions. As for the models, choose the one that suits your capacity needs. For example, if you need to lift lighter items, the TJIB - 3 might be enough, but for heavier loads, go for the TJIB - 20. Remember, all the measurements are approximate, so there might be slight differences. When it comes to maintenance, regularly check the steel structure for any signs of damage. Keep the painted blue finish clean to prevent rusting. If you notice any issues, stop using the jib immediately and get it checked by a professional.
