The BEV 1300-2 (600574420) drill is a high-performance tool. It comes with a two-speed gearbox, allowing you to choose the right speed for different tasks. The selectable 'impulse' mode is great for removing damaged screws and spot-drilling on smooth surfaces. Its robust die-cast aluminum gear housing ensures good heat dissipation and long durability. The rotating carbon brush bridge offers top performance even in counter-clockwise operation for stubborn screws. The Vario-Tacho-Constamatic (VTC) - Full Wave Electronics lets you work at customized speeds that stay almost constant under load. There's a thumbwheel for easy speed preselection. It has a Metabo long-life motor with patented dust protection for a long service life. The Metabo S-automatic torque limiting clutch provides safe working in case of unexpected stops. It can rotate forward and reverse. The spindle with a hexagonal recess allows working without a chuck. It also has overload protection to prevent motor overheating, restart protection to avoid accidental start-up, a non-slip soft-grip handle, a cable-protecting ball joint for free movement, and wear indication for carbon brushes. Note that the machine shown may vary in equipment and technical details depending on the configuration. Check the delivery scope and product description. Parameters: Rated input power is 1100 W, 9.6 AMPS, output power is 580 W, max. capacity in steel is 5/8 / 3/8 ', max. capacity in soft wood is 1 9/16 / 1 ', no-load speed is 0 - 1100 / 0 - 3100 RPM, revolutions at rated load is 1100 / 3100 RPM, 2 gears, maximum torque is 390 / 142 in-lbs, collar diameter is 1 11/16 ', chuck capacity is 0.059 - 0.512 ', drill spindle with hexagonal recess is 1/4 ', drill spindle thread is 1/2 ' - 20 UNF, weight (without power cable) is 6 lbs, cable length is 13 ft. Vibration: Drilling in metal is 4.2 m/s² with an uncertainty of measurement K of 1.5 m/s². Noise emission: Sound pressure level is 84 dB(A), sound power level (LwA) is 95 dB(A) with an uncertainty of measurement K of 3 dB(A).
Using the BEV 1300-2 drill is easy. First, select the appropriate speed with the thumbwheel according to your task. If you need to remove a damaged screw, use the 'impulse' mode. You can work without a chuck by using the spindle with a hexagonal recess. When using it, make sure to keep an eye on the wear indication for carbon brushes. For safety, always ensure that the power supply is stable and avoid overloading the drill. If the drill stops unexpectedly, the Metabo S-automatic torque limiting clutch will protect you. Also, the overload protection will prevent the motor from overheating. After each use, clean the drill to remove dust and debris. Store it in a dry place. Regularly check the carbon brushes and replace them when they are worn out. Keep in mind that the machine may vary in equipment and technical details, so always refer to the delivery scope and product description.
